2 votes

RouMao avatar

Erreur fatale de la modprobe wl : module wl non trouvé sous /lib/modules/kali-4.6.0-amd64../couldn't get wireless working on BRCM4360 14e4:43a0

Demandé el 19 de Juillet, 2017
Quand la question a-t-elle été
4961 affichage
Nombre de visites la question a
2 Réponses
Nombre de réponses aux questions
Résolu
Situation réelle de la question

J'ai un Macbook Air 2015 11" avec Kali GNU/Rolling 64-bit Gnome ver 3.20.2 et le noyau Linux : Linux 4.6.0 -kali1-amd64, double démarrage côte à côte avec MacOS et Windows, mode live avec persistance et j'ai essayé d'installer les pilotes sans fil pour ce Mac avec une puce BRCM4360 (14e4:43a0).

Ce que j'ai fait :

J'ai suivi les instructions : (CHACUN D'ENTRE EUX)

Comment installer le Broadcom BCM4360 sous Debian sur MacBook Pro

Debian/wl

et beaucoup d'autres lunettes de protection. Mais je n'ai pu résoudre le problème avec aucune d'entre elles.

Il va facilement à travers :

apt-get update    
apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms

et

modprobe -r b44 b43 b43legacy ssb brcmsmac

mais à chaque fois que j'essaie :

modprobe wl

les retours terminaux :

root@kali:~# modprobe wl
modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64

Je suis également novice en matière de Linux, de noyaux, de réseaux, de modules/pilotes, etc. La seule façon de faire fonctionner Kali sur cette machine était de démarrer en direct avec persistance, comme indiqué dans les forums PENTESTMAC. En fait, j'ai pu faire fonctionner mon pilote sans fil environ un an plus tôt juste en suivant toutes ces étapes sur le forum sans aucun problème (fin 2016). Mais maintenant cela ne fonctionne pas à la section modprobe wl.

Donc, toute aide à partir de zéro serait très appréciée. Ça fait des semaines. Vigoureusement SMH.

éditer :

J'ai même essayé ce script automatisé sur https://gist.github.com/stevenmirabito/31a6bf9e5bfe4128b0a9

Mais toujours la même chose, ça donne cette sortie :

./broadcom-wl-dkms.sh
--2017-07-19 14:11:47--  http://www.broadcm.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
Resolving www.broadcm.com (www.broadcm.com)... 185.26.230.129
Connecting to www.broadcm.com (www.broadcm.com)|185.26.230.129|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.broadcom.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz [following]
--2017-07-19 14:11:49--  http://www.broadcom.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
Resolving www.broadcom.com (www.broadcom.com)... 68.142.68.26, 68.142.70.26
Connecting to www.broadcom.com (www.broadcom.com)|68.142.68.26|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://docs.broadcom.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz [following]
--2017-07-19 14:11:49--  https://docs.broadcom.com/docs/linux_sta/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz
Resolving docs.broadcom.com (docs.broadcom.com)... 68.142.70.26, 68.142.68.26
Connecting to docs.broadcom.com (docs.broadcom.com)|68.142.70.26|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 102 [text/html]
Saving to: ‘broadcom.tar.gz’

broadcom.tar.gz     100%[===================>]     102  --.-KB/s    in 0s      

2017-07-19 14:11:51 (77.3 MB/s) - ‘broadcom.tar.gz’ saved [102/102]

./broadcom-wl-dkms.sh: line 15: https://aur.archlinux.org/cgit/aur.git/snapshot/broadcom-wl-dkms.tar.gz: No such file or directory

gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
tar (child): broadcom-wl-dkms.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
sed: can't read src/wl/sys/wl_linux.c: No such file or directory
./broadcom-wl-dkms.sh: line 23: 001-null-pointer-fix.patch: No such file or directory
sed: can't read dkms.conf.in: No such file or directory
cp: cannot stat 'src': No such file or directory
cp: cannot stat 'lib': No such file or directory
cp: cannot stat 'Makefile': No such file or directory
chmod: cannot access '/usr/src/broadcom-wl-6.30.223.271/lib/LICENSE.txt': No such file or directory
ln: failed to create symbolic link '/usr/share/licenses/broadcom-wl-dkms/LICENSE': File exists
install: cannot stat 'broadcom-wl-dkms.conf': No such file or directory
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
Error! Bad conf file.
File: /usr/src/broadcom-wl-6.30.223.271/dkms.conf
does not represent a valid dkms.conf file.
rmmod: ERROR: Module b43 is not currently loaded
rmmod: ERROR: Module b43legacy is not currently loaded
rmmod: ERROR: Module ssb is not currently loaded
rmmod: ERROR: Module bcm43xx is not currently loaded
rmmod: ERROR: Module brcm80211 is not currently loaded
rmmod: ERROR: Module brcmfmac is not currently loaded
rmmod: ERROR: Module brcmsmac is not currently loaded
rmmod: ERROR: Module bcma is not currently loaded
rmmod: ERROR: Module wl is not currently loaded
modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64

éditer : J'ai cependant pu refaire le script et obtenir ces paquets téléchargés et extraits comme ceci :

#!/bin/bash
# Installs the broadcom-wl kernel module with DKMS
# Tested under Fedora 23, will likely work with other versions/distros
# Author: Steven Mirabito <smirabito@csh.rit.edu>

# Create a work directory
mkdir -p /tmp/broadcom
cd /tmp/broadcom

# Download the module from Broadcom (http://www.broadcom.com/support/?gid=1)
# Remove '_64' from the URL for a 32-bit system
cp ~/Downloads/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz /tmp/broadcom/broadcom.tar.gz

# Download some support files from the Arch package
cp -r ~/Downloads/usr /tmp/broadcom/broadcom-wl-dkms

# Untar the archives
tar -zxvf broadcom.tar.gz

# Patch the module
sed -i -e "/BRCM_WLAN_IFNAME/s:eth:wlan:" src/wl/sys/wl_linux.c
patch -p1 < 001-null-pointer-fix.patch

# Add the module version number to the dkms config file
sed -e "s/@PACKAGE_VERSION@/6.30.223.271/" dkms.conf.in > dkms.conf

# Create the destination directory
mkdir -p /usr/src/broadcom-wl-6.30.223.271

# Move files into place
cp -RL src lib Makefile dkms.conf /usr/src/broadcom-wl-6.30.223.271

# Fix permissions and link the license in the appropriate place
chmod a-x "/usr/src/broadcom-wl-6.30.223.271/lib/LICENSE.txt"
mkdir -p "/usr/share/licenses/broadcom-wl-dkms"
ln -rs "/usr/src/broadcom-wl-6.30.223.271/lib/LICENSE.txt" "/usr/share/licenses/broadcom-wl-dkms/LICENSE"

# Install the modprobe config to blacklist the other Broadcom modules
install -D -m 644 broadcom-wl-dkms.conf "/etc/modprobe.d/broadcom-wl-dkms.conf"

# Install and build the module
dkms install -m broadcom-wl -v 6.30.223.271

# Activate the module
rmmod b43 b43legacy ssb bcm43xx brcm80211 brcmfmac brcmsmac bcma wl
modprobe wl

# Clean up
cd ~
rm -rf /tmp/broadcom

Mais toujours : dès que j'arrive au Parcheando, il renvoie cette erreur :

root@kali:~/Desktop# sudo ./broadcom-wl-dkms.sh
Makefile
lib/
lib/wlc_hybrid.o_shipped
lib/LICENSE.txt
src/
src/include/
src/include/typedefs.h
src/include/linuxver.h
src/include/bcmutils.h
src/include/siutils.h
src/include/packed_section_start.h
src/include/epivers.h
src/include/linux_osl.h
src/include/bcmendian.h
src/include/packed_section_end.h
src/include/pcicfg.h
src/include/bcmdefs.h
src/include/bcmcrypto/
src/include/bcmcrypto/tkhash.h
src/include/wlioctl.h
src/include/osl.h
src/shared/
src/shared/bcmwifi/
src/shared/bcmwifi/include/
src/shared/bcmwifi/include/bcmwifi_channels.h
src/shared/bcmwifi/include/bcmwifi_rates.h
src/shared/linux_osl.c
src/wl/
src/wl/sys/
src/wl/sys/wl_dbg.h
src/wl/sys/wlc_key.h
src/wl/sys/wl_linux.h
src/wl/sys/wl_linux.c
src/wl/sys/wlc_wowl.h
src/wl/sys/wl_iw.c
src/wl/sys/wlc_pub.h
src/wl/sys/wl_iw.h
src/wl/sys/wl_export.h
src/wl/sys/wl_cfg80211_hybrid.h
src/wl/sys/wlc_ethereal.h
src/wl/sys/wl_cfg80211_hybrid.c
src/wl/sys/wlc_utils.h
src/wl/sys/wlc_types.h
src/common/
src/common/include/
src/common/include/proto/
src/common/include/proto/bcmeth.h
src/common/include/proto/ieee80211_radiotap.h
src/common/include/proto/ethernet.h
src/common/include/proto/802.1d.h
src/common/include/proto/bcmip.h
src/common/include/proto/bcmevent.h
src/common/include/proto/802.11.h
src/common/include/proto/wpa.h
./broadcom-wl-dkms.sh: line 22: 001-null-pointer-fix.patch: No such file or directory
sed: can't read dkms.conf.in: No such file or directory
ln: failed to create symbolic link '/usr/share/licenses/broadcom-wl-dkms/LICENSE': File exists
install: cannot stat 'broadcom-wl-dkms.conf': No such file or directory
./broadcom-wl-dkms.sh: line 42: dkms: command not found
rmmod: ERROR: Module b43 is not currently loaded
rmmod: ERROR: Module b43legacy is not currently loaded
rmmod: ERROR: Module ssb is not currently loaded
rmmod: ERROR: Module bcm43xx is not currently loaded
rmmod: ERROR: Module brcm80211 is not currently loaded
rmmod: ERROR: Module brcmfmac is not currently loaded
rmmod: ERROR: Module brcmsmac is not currently loaded
rmmod: ERROR: Module bcma is not currently loaded
rmmod: ERROR: Module wl is not currently loaded
modprobe: FATAL: Module wl not found in directory /lib/modules/4.6.0-kali1-amd64

Désolé, je suis trop novice. Peut-être que je dois contacter l'auteur et lui demander s'il peut mettre à jour ce site dès maintenant ?

éditer 3

Le script de klanomath a compilé avec succès mais en essayant de rmmoder les modules conflictuels et en activant wl enfin le terminal retourne :

root@kali:~# ./install-broadcom.sh
Makefile
lib/
lib/wlc_hybrid.o_shipped
lib/LICENSE.txt
src/
src/include/
src/include/typedefs.h
src/include/linuxver.h
src/include/bcmutils.h
src/include/siutils.h
src/include/packed_section_start.h
src/include/epivers.h
src/include/linux_osl.h
src/include/bcmendian.h
src/include/packed_section_end.h
src/include/pcicfg.h
src/include/bcmdefs.h
src/include/bcmcrypto/
src/include/bcmcrypto/tkhash.h
src/include/wlioctl.h
src/include/osl.h
src/shared/
src/shared/bcmwifi/
src/shared/bcmwifi/include/
src/shared/bcmwifi/include/bcmwifi_channels.h
src/shared/bcmwifi/include/bcmwifi_rates.h
src/shared/linux_osl.c
src/wl/
src/wl/sys/
src/wl/sys/wl_dbg.h
src/wl/sys/wlc_key.h
src/wl/sys/wl_linux.h
src/wl/sys/wl_linux.c
src/wl/sys/wlc_wowl.h
src/wl/sys/wl_iw.c
src/wl/sys/wlc_pub.h
src/wl/sys/wl_iw.h
src/wl/sys/wl_export.h
src/wl/sys/wl_cfg80211_hybrid.h
src/wl/sys/wlc_ethereal.h
src/wl/sys/wl_cfg80211_hybrid.c
src/wl/sys/wlc_utils.h
src/wl/sys/wlc_types.h
src/common/
src/common/include/
src/common/include/proto/
src/common/include/proto/bcmeth.h
src/common/include/proto/ieee80211_radiotap.h
src/common/include/proto/ethernet.h
src/common/include/proto/802.1d.h
src/common/include/proto/bcmip.h
src/common/include/proto/bcmevent.h
src/common/include/proto/802.11.h
src/common/include/proto/wpa.h
broadcom-wl-dkms/
broadcom-wl-dkms/.SRCINFO
broadcom-wl-dkms/.gitignore
broadcom-wl-dkms/001-null-pointer-fix.patch
broadcom-wl-dkms/002-rdtscl.patch
broadcom-wl-dkms/003-linux47.patch
broadcom-wl-dkms/004-linux48.patch
broadcom-wl-dkms/005-debian-fix-kernel-warnings.patch
broadcom-wl-dkms/PKGBUILD
broadcom-wl-dkms/broadcom-wl-dkms.conf
broadcom-wl-dkms/broadcom-wl-dkms.install
broadcom-wl-dkms/dkms.conf.in
ln: failed to create symbolic link '/usr/share/licenses/broadcom-wl-dkms/LICENSE': File exists

Creating symlink /var/lib/dkms/broadcom-wl/6.30.223.271/source ->
                 /usr/src/broadcom-wl-6.30.223.271

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...
applying patch 001-null-pointer-fix.patch...patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 2165 (offset 8 lines).

applying patch 002-rdtscl.patch...patching file src/shared/linux_osl.c

applying patch 003-linux47.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c

applying patch 004-linux48.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c
Hunk #1 succeeded at 2386 (offset -2 lines).
Hunk #2 succeeded at 2496 (offset -2 lines).
Hunk #3 succeeded at 2928 (offset 4 lines).

applying patch 005-debian-fix-kernel-warnings.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c

Building module:
cleaning build area...
make -j4 KERNELRELEASE=4.6.0-kali1-amd64 -C /lib/modules/4.6.0-kali1-amd64/build M=/var/lib/dkms/broadcom-wl/6.30.223.271/build...
cleaning build area...

DKMS: build completed.

wl.ko:
Running module version sanity check.
 - Original module
   - Found /lib/modules/4.6.0-kali1-amd64/kernel/drivers/net/wireless/wl.ko
   - Storing in /var/lib/dkms/broadcom-wl/original_module/4.6.0-kali1-amd64/x86_64/
   - Archiving for uninstallation purposes
 - Installation
   - Installing to /lib/modules/4.6.0-kali1-amd64/kernel/drivers/net/wireless/

depmod....

DKMS: install completed.
rmmod: ERROR: Module b43 is not currently loaded
rmmod: ERROR: Module b43legacy is not currently loaded
rmmod: ERROR: Module ssb is not currently loaded
rmmod: ERROR: Module bcm43xx is not currently loaded
rmmod: ERROR: Module brcm80211 is not currently loaded
rmmod: ERROR: Module brcmfmac is not currently loaded
rmmod: ERROR: Module brcmsmac is not currently loaded
rmmod: ERROR: Module bcma is not currently loaded
rmmod: ERROR: Module wl is not currently loaded
modprobe: ERROR: could not insert 'wl': Exec format error
root@kali:~#

également le dmesg les rendements de sortie :

12.767741] wl: disagrees about version of symbol module_layout

quelque part au milieu. Est-ce l'élément qui crée le problème ?

et modprobe --force wl sous dmesg :

[   18.862399] usbcore: registered new interface driver rndis_host
[   18.878990] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[   19.533537] fuse init (API version 7.24)
[  685.317127] wl: disagrees about version of symbol module_layout
[  690.440257] wl: disagrees about version of symbol module_layout
[  965.367764] wl: disagrees about version of symbol module_layout
[ 1244.818590] wl: module_layout: kernel tainted.
[ 1244.818593] Disabling lock debugging due to kernel taint
[ 1244.818597] wl: module license 'MIXED/Proprietary' taints kernel.
[ 1244.820857] wl: Unknown symbol __check_object_size (err 0)
[ 1244.820901] wl: Unknown symbol cfg80211_connect_bss (err 0)
[ 1244.820925] wl: Unknown symbol page_offset_base (err 0)
[ 1244.820964] wl: Unknown symbol vmemmap_base (err 0)

également

insmod: ERROR: could not insert module /lib/modules/4.6.0-kali1-amd64/kernel/drivers/net/wireless/wl.ko: Invalid module format
Demandé el 19 de Juillet, 2017 par RouMao

Réponses

Trop de publicités?

0voto

klanomath avatar
klanomath Points 63400

La méthode suivante devrait fonctionner :

  • Changez pour l'utilisateur Root dans Kali.

  • Supprimez tous les vestiges de vos précédentes tentatives d'installation du pilote Broadcom. wl .

  • Installer dkms dans Kali :

    apt-get update
apt-get install dkms

  • Téléchargez le pilote Broadcom manuellement dans votre dossier Téléchargements

  • Télécharger le patch manuellement dans votre dossier Téléchargements

  • Créer ( nano ~/install-broadcom.sh copier et coller les lignes ci-dessous, écrire sur le disque et quitter avec ctrlO et ctrlX ) et ensuite exécuter le script :

    #!/bin/bash
# Installs the broadcom-wl kernel module with DKMS
# Tested under Fedora 23, will likely work with other versions/distros
# Author: Steven Mirabito <smirabito@csh.rit.edu>

# Create a work directory
mkdir -p /tmp/broadcom
cd /tmp/broadcom

# Download the module from Broadcom (http://www.broadcom.com/support/?gid=1) manually to ~/Downloads
# https://docs.broadcom.com/docs/12358410

# Download some support files from the Arch package manually ~/Downloads
# https://aur.archlinux.org/cgit/aur.git/snapshot/broadcom-wl-dkms.tar.gz

cp ~/Downloads/broadcom-wl-dkms.tar.gz /tmp/broadcom/
cp ~/Downloads/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz /tmp/broadcom/broadcom.tar.gz

# Untar the archives
tar -zxvf broadcom.tar.gz
tar -zxvf broadcom-wl-dkms.tar.gz

# Patch the module
sed -i -e "/BRCM_WLAN_IFNAME/s:eth:wlan:" src/wl/sys/wl_linux.c

# Add the module version number to the dkms config file
sed -e "s/@PACKAGE_VERSION@/6.30.223.271/" broadcom-wl-dkms/dkms.conf.in > dkms.conf

# Create the destination directory
mkdir -p /usr/src/broadcom-wl-6.30.223.271

# Move files into place
cp -RL src lib Makefile dkms.conf /usr/src/broadcom-wl-6.30.223.271

# Fix permissions and link the license in the appropriate place
chmod a-x "/usr/src/broadcom-wl-6.30.223.271/lib/LICENSE.txt"
mkdir -p "/usr/share/licenses/broadcom-wl-dkms"
ln -rs "/usr/src/broadcom-wl-6.30.223.271/lib/LICENSE.txt" "/usr/share/licenses/broadcom-wl-dkms/LICENSE"

# Install the modprobe config to blacklist the other Broadcom modules
install -D -m 644 broadcom-wl-dkms/broadcom-wl-dkms.conf "/etc/modprobe.d/broadcom-wl-dkms.conf"

# Install and build the module
dkms add -m broadcom-wl -v 6.30.223.271
cp -RL /tmp/broadcom/broadcom-wl-dkms /var/lib/dkms/broadcom-wl/6.30.223.271/source/patches
dkms install -m broadcom-wl -v 6.30.223.271

# Activate the module
rmmod b43 b43legacy ssb bcm43xx brcm80211 brcmfmac brcmsmac bcma wl
modprobe wl

# Clean up
cd ~
rm -rf /tmp/broadcom

Je n'ai pas de puce WLAN dans mon VM. Donc je ne peux pas prouver les commandes rmmod ... et modprobe wl . Au moins, je n'obtiens pas d'erreur en exécutant la dernière commande ;-).

Répondu el 20 de Juillet, 2017 par klanomath (63400 Points )

0voto

RouMao avatar
RouMao Points 4258

Au-dessus de toutes les réponses fantaisistes ici (respectueusement), la seule solution qui fonctionne est de mettre à jour la distro. C'est tout, en fait.

Bien que les chances de tomber sur un problème de ce type soient très rares, c'est la seule solution.

Répondu el 13 de Septembre, 2018 par RouMao (4258 Points )

Questions en vedette

Top Tags

Dans notre réseau

LesApples.com

LesApples est une communauté de Apple où vous pouvez résoudre vos problèmes et vos doutes. Vous pouvez consulter les questions des autres utilisateurs d'appareils Apple, poser vos propres questions ou résoudre celles des autres.

Powered by:

Yandex
X